500ml Spray - Satin Finish BLACK RAL 9005
ZG-90 zinc phosphate enhanced paints which prime and top-coat in one application.
Provides a superior combination of good drying time, great coverage and solid opacity.
Demonstrates superior corrosion protection (meets ISO 12944-2, cat. C3, tested to
ASTM B117) and adhesion (tested to ISO 2409:0). The paints are RAL matched for accurate
and consistent colour reproduction with a longlasting satin finish.
Application:
General fabrication: Use on bare, degreased metal to provide
an effective, colour-matched finish with good long-term protection.
Facility Maintenance: use for repairing and maintaining fences,
metal sheets, air conditioning units and ducting.
Complementary products: TF-90 for surface degreasing, MZ-90
for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848
MZ-90 / Parcode 1972
Key Features
- 2-in-1: Primer and Topcoat
- Effective protection against corrosion
- Excellent adhesion and flexibility for longterm performance (ISO 2409:0)
- Crossrail approval #CRL-MCR-004850
- Tested to ASTM B117 and DIN EN ISO12944-2
- RAL referenced colour matches available: Black, Red, Blue, Green, White,
and Yellow
- Also available as ZG-90 Silver - see separate data Specifications Tab - Partcode 1785 and 2018
Application
General fabrication: Use on bare, degreased metal to provide
an effective, colour-matched finish with good long-term protection.
Facility Maintenance: use for repairing and maintaining fences,
metal sheets, air conditioning units and ducting.
Complementary products: TF-90 for surface degreasing, MZ-90
for enhanced anticorrosion performance. (Cathodic protection) TF-90 / Partcode 1848
MZ-90 / Parcode 1972
Directions for use
- Use in well ventilated area.
- Remove any rust and scale with a wire brush. Ensure that the surface to
be coated is clean, dry and free from grease.
- ZG-90 contains solids which settle during storage. Aerosol: shake the can
vigorously until the agitator ball is free and continue shaking for a further
minute. Tin: Carefully stir the paint until solvent and solids are thoroughly
mixed.
- Shake/stir periodically during application.
- Apply in light, even coats - best results are obtained with 2 - 3 light
coats rather than one heavy coat.
- Additional coats can be applied after 15 - 20 minutes.
- When finished: clear the aerosol valve by briefly spraying the can upside
down. When using the tin, firmly reseal it. Clean brushes with White Spirit.
- Do not use on the inside of water storage tanks.
- Remove prior to welding.
Technical Data:
Description |
Spec |
APPEARANCE |
Matched to RAL colour Black (RAL 9005) |
ODOUR |
Solvent |
MAXIMUM TEMPERATURE RESISTANCE OF CURED FILM |
80 C |
COATING THICKNESS (1-PASS, AEROSOL) |
30 µM |
MINIMUM APPLICATION TEMPERATURE (SUBSTRATE) |
10 C |
TOUCH DRY |
20 minutes |
HARD DRY |
6 hours |
SALT SPRAY RESISTANCE (ISO 12944, CATEGORY C3) |
>220 hours |
PRODUCT SIZE |
500ml Aerosol |
MANUFACTURER CODE |
1935 |
Storage and Shelf Life
The aerosol product may be stored at normal ambient temperatures and has a shelf
life of not less than 48 months with correct storage. Aerosols should always be
stored below 50 C, away from direct heat and naked flame.
The tin/bulk version may
be stored at normal ambient temperatures and has a shelf life of not less than 48
months with correct storage. It should always be stored below 50 C, away from direct
heat and naked flame.
CAN32813Specialist Aerosols > Anti-Corosion / Paint > Cold Zinc Galvaninsing Paint